50kva Pole Mounted Transformer 12.47kv To 277v Oil Filled Distribution Electric Pole Transformer UL Listed​

The pole-mounted transformer is a fully sealed cylindrical structure and is installed by pole-mounted suspension. It has the advantages of small size, strong overload capacity, high reliability in continuous operation, simple maintenance, long service life

The pole-mounted transformers produced by WINLEY have obtained UL/cUL certification, with rated capacities ranging from 10 kVA to 333 kVA. The products meet or even exceed ANSI, IEEE, CSA, IEC60076 and other standards.

Main Data

Drawing

Feature

• High pressure porcelain bushing
• Low pressure porcelain bushing
• Eyebolt Terminals - HV and LV
• LV neutral point earthing bus
• Compliant with ANSl support lugs
• Mild steel tank
• Non-PCB mineral oil/FR3rm fluid
• 0ff-load tap changer
• Oil-filling plug with cap and earth
• Pressure relief device
• Coil: copper/Aluminum winding
• lron core: silicon steel
• Lifting ears
• Nameplate engraving

Pole Mounted Transformer Key Craft

1. Magnetic circuit design
The iron core's shape, size, hysteresis, and eddy current loss are important factors to consider. Properly designing the magnetic circuit can lead to efficient energy transmission and reduced loss.

2. Winding design
Factors such as the number of turns, wire material, interlayer insulation, and wiring method should be taken into consideration during the design process. By implementing a well-planned winding design, the transformer can achieve greater load capacity and reliability.

3. Insulation material selection
Choosing the right insulation materials is paramount to ensure safety and longevity. It's essential to opt for insulating materials that offer excellent insulation performance, high-temperature resistance, arc breakdown resistance, and moisture resistance.

4. Vacuum oil filling
Single-phase pole-mounted transformers typically utilize a vacuum oil filling method. This involves treating the transformer chips with a vacuum, injecting insulating oil, eliminating air bubbles, and sealing the transformers. The vacuum oiling process is beneficial as it enhances the insulation performance and thermal stability of the transformer, leading to prolonged service life.

5. Heat treatment
Transformers' mechanical properties and strength can be enhanced through heat treatment. This process alters the material's organizational structure, boosting its hardness and wear resistance while reducing stress and deformation.

Specifications

Production process